Cleaning And Maintenance - cecotec CONGA 1790 TITANIUM Manuel D'instructions

ENGLISH
Cleaning scheduling
This robot includes schedule settings in order for you to customise the cleaning cycles. The
robot can be scheduled through the App.

4. CLEANING AND MAINTENANCE

In order to lengthen your robot's shelf life and to allow your robot to operate at peak
performance, carry out the following procedures periodically.
Empty the robot's dust tank.
Press the dust tank's release button.
Fig. 30
Open the dust tank and empty it.
Fig. 31
Cleaning of the robot's filter
Remove the filter.
Carefully shake off all dust from the filter.
Fig. 32
Cleaning of the free-fall sensors
Use a clean, dry and soft cloth to wipe off any dust from the free-fall sensor located on the
right side of the robot's bottom part.
Warning: Do not spray cleaning products directly on the sensor.
Fig. 33
Cleaning of the main brush
Slightly press the main brush frame's tabs in order to open the main brush storage gap and to
remove it.
Fig. 34
Remove any hair, fluffs or dust collected in the brush and around the axes.
Fig. 35
Clear and clean the robot's suction channel.
Fig. 36
Reinstall the main brush and its frame.
Fig. 37
High-efficiency filter
The high-efficiency filter is designed with fibres that help trapping dust particles, dust mites,
pollen... It is very important to clean periodically the filter, to avoid these particles from building
38