cecotec CONGA 1790 TITANIUM Manuel D'instructions page 37

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
ENGLISH
base. Once the battery is fully charged, the robot can start a new cleaning cycle.
Warning: If there is no good access to the charging base, the robot will not be able to return to
its charging position. In that case, once the robot has stopped, take it manually to the charging
base.
Pause
Press the power button on the robot to pause the cleaning process.
Press the power button on the robot to resume the cleaning process.
Fig. 22
Return to the charging base
Press the back home button on the robot in order to send the robot to the charging base.
Turn off
Long press the power button to turn the robot off.
Fig. 23
Warning: The robot vacuum cleaner has a power switch located on its main body. If the robot
is not going to be used for long periods of time, it is suggested to switch it off. If the robot is
switched off, it will restore factory default settings as a safety measure. The robot will only
carry out scheduled cleaning if it has been scheduled while the switch is ON, otherwise, it will
have to be scheduled again from the App.
Cleaning modes
This robot includes different modes and different functions that can be activated from the App.
Auto mode
Press the power button for the robot to start Auto cleaning mode.
The robot will clean the whole surface, edges, around objects such as tables, chairs etc. Once
it starts running out of battery, it will return to the charging base.
Fig. 24
Thorough Scrubbing mode
Attach the mop cloth to the water tank and fill the tank with water.
Take the dust tank out.
Install the water tank in the robot and turn it on.
Fig. 25
Use the App to select the desired scrubbing power level: High, Medium or Low.
Once the scrubbing mode is selected, the device will perform the function "All in One" to
vacuum, mop, scrub and sweep at the same time thanks to its mixed tank.
Note: If you want to sweep the floor, skip the water-filling step.
To ensure perfect scrubbing from the start, it is suggested to dampen the mop cloth evenly
36

Publicité

Table des Matières
loading

Table des Matières