cecotec CONGA 1790 TITANIUM Manuel D'instructions page 38

ENGLISH
with water before use.
Spiral mode
The robot will carry out an intense cleaning of a specific area when this mode is activated.
The robot will start cleaning at a specific point and will move outwards performing spiral
movements (1 meter). Then, it will return to the starting point in spiral movements again.
Before operating the robot under Spiral cleaning mode, place it on the spot to be cleaned.
Press the spiral cleaning button on the App.
Fig. 26
Edge mode
When this mode is selected, the robot will clean along walls and around furniture (table or
chair legs, for example).
Press the edge cleaning button on the App.
Fig. 27
Room mode
The robot will carry out a cleaning cycle under Auto mode and then will return to the starting
point.
Press the room cleaning button on the App display.
Fig. 28
To ensure an efficient cleaning of the room, close the door.
Suction power level function
Select the desired robot's suction power during the cleaning process. There are 3 suction
power levels: Turbo, Normal and Eco. The power level function can also be turned off if you
wish to use the Wet & dry tank for scrubbing only.
Fig. 29
Scrubbing intensity levels function
Select the desired water intensity level during the scrubbing process. There are 3 water levels:
High, Medium or Low. The scrubbing intensity function can also be turned off if you wish to use
the Wet & dry tank for sweeping only.
Random mode
The robot will start cleaning randomly and will return to the charging base smartly when it
runs out of battery. The robot will not create maps under this mode.
This mode can be activated from the App.
Manual mode
The robot can be moved manually using the direction buttons on the App.
37