Use Interface; Panel Key - Precision Tech Lumina Smart Manuel Utilisateur

4. USE INTERFACE

4.1 Panel key

Main switch
Setting key
TURN POWER ON
Press more than 0.5 seconds to turn on the instrument.
MEMORY CHANGE
Press setting key during standby state.
TURN POWER OFF
Long press to turn power off.
ADVANCED SETTING
During power off state, holding down press
then press to entry advanced setting.
Press till target setting, press
confirm.
1. Battery
2. Memory
3. Curing light intensity
4. Curing time
,
to adjust, then press to
27