Operation Mode; Standard Mode; Pulse Mode - Precision Tech Lumina Smart Manuel Utilisateur

6.3 Operation mode

STANDARD MODE

In these three modes, the light intensity
can be set to 2300mW/cm
cm or 1000mW/cm .
2 2
Wavelength: 385nm-515nm
When pressed, the setting light inten-
sity is output immediately, and the sound
is prompted every 5 seconds.
RAMP MODE
Light intensity : 1000mW/cm
Wavelength: 385nm-515nm
When pressed, the light intensity
gradually increases to 1000mW/cm
the first 5 seconds, and then continues
to output 1000mW/cm
sound every 5 seconds.

PULSE MODE

Light intensity : 1000mW/cm
Wavelength: 385nm-515nm
When pressed, the output light in-
tensity is 1000mW/cm
every 1 second, prompting the sound
every 5 seconds.
DETECTING MODE
Light intensity : 600mW/cm
Wavelength: 385nm-410nm
When pressed, he setting light inten-
sity is output immediately, and the sound
is prompted every 5 seconds.
Note
• This mode is only suitable for detecting dental calculus, caries, cracks,
etc.
Warning
• Detect Mode cannot be used to cure dental resins and composites,
otherwise there is a risk of incomplete curing.
, 1500mW/
2
2
in
2
, prompting the
2
2
and flashes once
2
2
31