Use Interface; Volume Control - Precision Tech Apica Air Mode D'emploi

5. USE INTERFACE

9
1
2
3
TURN POWER ON/OFF

VOLUME CONTROL

SETTING THE REFERENCE
POINT
POWER DISPLAY
REFERENCE RANGE
DISPLAY REVERSING
8
7
6
5
4
Press to turn on. Long press
for 3 minutes to turn off.
During standby state, shot press
minor to the maximum.
During standby state, press
Seven points can be selected circularly. The cursor flashing position
indicates the selected reference point.
Display the remaining power through the number of grid.
The flash of the measuring bar is the current measured vale, represents
the estimated distance from the apical foramen in millimeters.
During standby state, press
1. Set key
S
2. Power key
3. Reference range
4. Apical area display
5. Reference point
6. Measuring bar
7. Measured value
8. Volume display
9. Power display
more than 2 seconds, or no operation
to cycle the volume through the
to set the reference point between 0~1.
S
and
S
together to reverse the display.
31