Technical Description; Technical Specifications; Environmental Conditions For Intended Use - Precision Tech Lumina Max LAD Manuel Utilisateur

1. TECHNICAL DESCRIPTION

The Lumina Max LAD intended usage is light activation of photosensitive materials in the light spectrum
around 460 nm. Examples are dental composites and other dental light cured materials.
Furthermore, the Lumina Max LAD light can be used for light activated disinfection with photosensitizing
agent QroxB2 .
®
The product is classified as an electronic medical device electric class II according to DS/EN 60601-1:
2006. The product is classified as a class 2 LED product according to EN 60825-1:2001 Ed 1.2.
The manufacturer declares that the product described in this manual complies with the above mentioned
standards.
Warnings
4. In order to maintain proper operation, follow instructions in this manual.
5. Use of the light without a tip may cause overheating of the tissue if the light is used close to the gingiva.
6. Extended use cause tips and cover to be hot and may cause slight burning sensation of mucosa, if touched.
7. Do not reuse covers or tips as this may cause cross contamination.
8. If the light beeps every 2s when placed in docking station, it is a warning that the charging voltage is 6V
or higher, in other words a wrong power supply is being used.
9. The Lumina Max LAD photosensitizer QroxB2

1.1 Technical specifications

The Lumina Max LAD light consists of a hand piece, a docking station and an external power supply.
Disposable covers and tips protect against cross contamination.
POWER SUPPLY
Manufacturer
Model
Input power
Output power
Or equivalent medical approved power supply
supplied by the manufacturer

1.2 Environmental conditions for intended use

Temperature range
Humidity range
1. Do not expose directly into the eyes, or look directly at the emitted
light.
2. It is recommended to use eye protection.
3. Medical electronic equipment is sensitive to electromagnetic fields.
Portable and mobile high frequency communication devices may in-
terfere with medical devices.
Dongguan Shilong Fuhua
Electronic Co. Ltd.
UEO8WCP-050100SPA
100–240VAC, 50/60Hz
5.0VDC, 1.0A
+10˚C to +40˚C
30% to 75%
can stain clothing.
®
Battery type
Nominal voltage
Nominal capacity
Re-charging time
User capacity
Output intensity
Wavelength
Atmospheric pressure range
IP class
BATTERY
LiFePO
4
3.2V
1.450mA
2,5 hours
approx. 760 seconds
LED DIODE
5.500-7.500 mW/cm
450-470nm (85%),
peak 460nm
70kPa to 106kPa
(0.7 bar to 1.06 bar)
2X
2
13