Maintenance; Handpiece - Precision Tech Lumina Smart Manuel Utilisateur

7. MAINTENANCE

HANDPIECE

CHARGING BASE
Wipe all the surfaces with a cloth lightly moistened with Ethanol for Disinfection (Ethanol 70 to 80
vol%) at least 2min, repeat for 5 times.
Warning
• Do not use anything except Ethanol for Disinfection (Ethanol 70 to 80 vol%).
• Do not use too much ethanol as it's going into machine and damage the components inside.
Warning
• Please discard it after use and do not use it again.
• The product has been disinfected with ethylene oxide, so there is no need to disinfect it before use.
32
DISINFECTION COMPONENTS
LIGHT SOURCE HEAD
PROTECTIVE LIGHT SHIELD
DISPOSABLE COMPONENTS
DISPOSABLE SLEEVE (100PCS)
ADAPTER