Operation; Charge - Precision Tech Lumina Smart Manuel Utilisateur

6. OPERATION

6.1 Charge

Warning
• Do not change the battery, only trained technician or distributor can change the battery, the electro-
nic parts will be damaged if use a wrong battery or install with a wrong way.
In the volume setting menu, press
be set to "Off", "low", "mid" or "high".
Press to change setting, press
hand setting mode
The right hand and the left hand can be set in the "Hand" setting menu,
Press to change setting, press
The last item is the firmware version, and the handpiece shuts down auto-
matically within 1 s after the version information is displayed.
Displays the present remaining amount of the battery.
Less than 15% remains, please charge.
Note
• If the power if less than 15%, must be recharged within 30 days,
otherwise the battery will be damaged.
Charging indication appears on the screen, and flashes slowly, when
battery is fully charged or in a state near full charge, the flash will stop
Fully charged will take about 4 hours, depending on residual battery
power and battery state.
It can be recharged 300-500 times, depending on the operating condi-
tions of the device.
Note
•When changing, other function will forcibly stop, take from charge
base, press main switch, the last function will recall.
to select different settings. It can
to enter the next setting "Hand"
to enter the next setting.
29