Stihl MSE 220 Notice D'emploi page 27

The kickback tendency of the saw is
increased if the depth gauges are too
low.
Sharpening Tools (special accessories)
Chain pitch Round file ^
inch (mm) mm (inch)
1 5
/4 (6,35) 4,0 (
3 5
/8 P (9,32) 4,0 (
3
0.325 (8,25) 4,8 (
3 13
/8 (9,32) 5,2 (
1)
consisting of file holder with round file, flat file and filing gauge
MSE 220
All manuals and user guides at all-guides.com
Place the filing gauge on the chain –
N
the highest point of the depth gauge
must be level with the filing gauge.
RSC3, RMC3, PMC3, PMMC3
The upper part of the humped drive link
(with service marking) is lowered along
with the depth gauge.
Round file File holder
Part No. Part No.
/32) 5605 772 4006 5605 750 4327
/32) 5605 772 4006 5605 750 4327
/16) 5605 772 4806 5605 750 4328
/64) 5605 772 5206 5605 750 4329
The other parts of the triple-humped tie
strap and humped drive link must not be
filed since this may increase the
kickback tendency of the saw.
After sharpening, clean the chain
N
thoroughly, remove filings or
grinding dust – lubricate the chain
thoroughly.
Before a long out-of-service period,
N
clean the chain and store it in a well-
oiled condition.
Filing gauge Flat file
Part No. Part No.
1110 893 4000 0814 252 3356
1110 893 4000 0814 252 3356
1110 893 4000 0814 252 3356
1110 893 4000 0814 252 3356
English
1)
Sharpening kit
Part No.
5605 007 1027
5605 007 1027
5605 007 1028
5605 007 1029
25