EXE_IFU_TE_MODULO-2_4136751_mise en page 06/12/11 17:30 Page4
To remove the operating valve
•
Press down the centre of the operating valve
(A) and align the position indicator (D) with
the
mark on the lid -
•
Remove the valve.
Never place
your pressure cooker
on a heat source
with the handles
folded.
First use
•
Clip the tripod (J) under the steam basket (I)
- figs 5 and 6
•
Place the steam basket (I) in the bottom of
the pressure cooker
•
Fill the pressure cooker with water, up to the
2/3rds mark (M).
•
Close the pressure cooker.
•
Fit the operating valve (A) and set it to
2
position
.
•
Place your pressure cooker on a heat source
set to maximum power.
•
When steam starts to escape from the valve,
reduce the heat and time off 20 minutes.
•
Once the 20 minutes are up, turn off the heat.
4
All manuals and user guides at all-guides.com
Fig. 11
.
Before use, remove the labels on each handle.
Do not attempt to fold the handles without
depressing the unlocking buttons
To fold the handles:
To put the
handles in
the use position:
- fig 7
Folding handles*
"CLICK"
* depending on model