Burkert 8222 ELEMENT neutrino Manuel Utilisateur page 31

8.3.2. Assembling and wiring the female connector, order code 917116
See § 1 2.Spare parts and accessories
1
11,5
Fig. 17: M12 multi-pin connector (not provided)
26
All manuals and user guides at all-guides.com
2
Type 8222 ELEMENT neutrino
Installationandwiring
→
Completely unscrew the nut [1].
→
Remove the rear section of the connector [2].
→
Thread the cable through the nut and the rear part of the
connector.
→
Strip 20 mm of the cable.
→
Cut the central wire (earth) so that its length is equal to
11.5 mm.
→
Expose 5.5 mm of the wires on the stripped cable.
→
Insert each wire into the appropriate pin (see pin allocation
in § 8 .3.3 ) .
→
Tighten the connector nut.
english