Technical Data - Videotec MAXIMUS MPX 2 Serie Manuel D'instructions

14 Technical data

14.1 MAXIMUS MPX SERIES2
(MPXHD)
14.1.1 General
AISI 316L stainless steel construction
External surfaces micro-shot peened and electro-
polished
Dynamic positioning control system
Maximum number of presets: 250
14.1.2 Mechanical
Cable inputs: 2 x 3/4" NPT
Zero backlash
Horizontal rotation: 360°, continuous rotation
Vertical rotation: from -90° up to +90°
Horizontal speed (variable): from 0.1°/s up to 100°/s
Tilt speed (variable): from 0.1°/s up to 100°/s
Accuracy of preset positions: 0.02°
Integrated wiper
Window with extra clear tempered glass
• Thick: 12mm (0.47in)
Unit weight: 26.5kg (58lb)
14.1.3 Electrical
Supply voltage/Current consumption:
• 230Vac ±10%, 0.5A, 50/60Hz
• 24Vac ±10%, 5A, 50/60Hz
• 120Vac ±10%, 1A, 50/60Hz
• 220Vac ±10%, 0.54A, 50/60Hz
• 100Vac ±10%, 1.2A, 50/60Hz
Power consumption:
• 120W max
MNVCMPXHDC_2222_EN
14.1.4 Network
RJ45 port
• Ethernet connection: 10BASE-T/100BASE-T
Slot SFP (SMALL FORM FACTOR PLUGGABLE)
• Ethernet connection:100BASE-FX
• Supply voltage: 3.3V
• Standard: MSA compliant
The SFP module (not supplied by VIDEOTEC) must
meet the following requirements:
• Laser: Class 1, complies with EN60825-1
• Certification: UL/IEC 60950-1 or UL/IEC 62368-1
14.1.5 I/O interface
Input for remote reset: 1
Alarm inputs: 1
Relay outputs: 1+1 (1A, 30Vac/60Vdc max, one relay
reserved for washer pump and one configurable)
39