Technical Data; Mhx; General; Mechanical - Videotec MAXIMUS MHX Manuel D'instructions

13 Technical data

If the device comes into contact with harsh
substances, it is the responsibility of the user to take
suitable precautions to prevent damage and not
compromise the type of protection.
• Aggressive substances: Acidic liquids or gases
that may attack metals, or solvents that may affect
polymeric materials.
• Suitable precautions: Regular checks as part
of routine inspections or establishing from the
material's data sheet that it is resistant to specific
chemicals.
It is the end users responsibility to ensure the
materials of construction as detailed are suitable for
the intended point of installation. If in doubt consult
the manufacturer.
38

13.1 MHX

13.1.1 General

AISI 316 stainless steel construction
Passivated and electropolished external surfaces
Silicone O-ring seals

13.1.2 Mechanical

2 3/4" NPT holes for cable entry
Window
• Tempered glass
• Dimensions (Ø): 75mm (3.0in)
• Thick: 12mm
Sunshield
Unit weight: 16.5kg (36lb)

13.1.3 Electrical

Power supply/Current consumption:
• 230Vac, 0.34A, 50/60Hz
• 120Vac, 0.5A, 50/60Hz
• 24Vac, 2.2A, 50/60Hz
• 12Vdc, 2.8A
Heater (Ton 10°C±4°C (50°F±7°F), Toff 22°C±3°C
(77°F±5°F))
• 230Vac: 60W max
• 120Vac: 40W max
• 24Vac: 30W max
• 12Vdc: 34W max
Devices to install inside the housing
• Camera equipped with lens with total power of
13W max
• Minimum distance between camera and
housing's window: 10mm (0.4in)
• Dimensions of the cameras/lenses that can
be installed: 80x82x245mm (3.1x3.2x9.6in)
(WxHxL) max
I/O (version with wiper)
• 1 input for remote wiper activation. Dry contact
NO
• 1 input for status Day/Night camera
• 1 relay output for washer activation (1A
30Vac/60Vdc max)
• 1 relay output for illuminator activation (1A
30Vac/60Vdc max)
MNVCMHX_1432_EN