Transmitter Configuration - GM VSL 4000 Guide D'installation

**Channel 2: If any transmitter button from a known transmitter is programmed to channel 2, all transmitters
will be erased from memory, and system features will return to factory default settings. This is useful in cases
where the one of the customer's transmitters is lost or stolen. This will erase any lost or stolen transmitters from
the system's memory. It can also be used to start from scratch if the transmitter buttons were programmed incorrectly.
***Channels 7-9: To custom configure the system's remote transmitters, channels 7-9 are used to assign the
arm, disarm, and panic functions to separate buttons on the remote control. If the remote transmitter being used
has already been programmed to the system, it will be necessary to delete all transmitters (channel 2) before
that transmitter can be programmed to channels 7-9.
4. Press the transmitter button. While HOLDING the Valet/program switch, press the button
from the transmitter that you wish to assign to that channel. The unit will chirp indicat-
ing successful programming. It is not possible to teach a transmitter button to the system
more than once.

transmitter configuration

The transmitters can be programmed with the Standard Configuration by using the Channel 1 Auto-Learn Standard
Configuration function in the Transmitter/Receiver Learn Routine. When programmed for Standard Configuration,
the transmitter buttons are assigned to the following functions:
LOCK ...................................operates ...........................Arm only
UN
...................................operates ...........................Disarm only
LOCK
GM
..................................operates ...........................Channel 2
...................................operates ...........................Panic
LOCK and
GM
and
All manuals and user guides at all-guides.com
UN
.....................operate............................Channel 3
LOCK
...................operate ..........................Channel 4
28 - English
NVSL4000