H1/6; H1/7; H1/8 - GM VSL 4000 Guide D'installation

All manuals and user guides at all-guides.com
H1/6 BLUE (-) instant trigger input, zone 1
This input will respond to a negative input with an instant trigger. It is ideal for hood and trunk pins and will
report on Zone 1.
H1/7 VIOLET (+) door trigger input, zone 3
This wire is used in vehicles that have a positive (+) switched dome light circuit. Connect the violet wire
to a wire that shows (+)12V when any door is opened, and ground when the door is closed. This wire will report
Zone 3.
H1/8 BLACK (-) chassis ground connection
Remove any paint and connect this wire to bare metal, preferably with a factory bolt rather than your own screw.
(Screws tend to either strip or loosen with time.) We recommend grounding all your components, including the
siren, to the same point in the vehicle.
13 - English
NVSL4000