Primary Harness (H1) Wire Connection Guide; H1/1; H1/2 - GM VSL 4000 Guide D'installation

Table des Matières

Publicité

primary harness (H1) wire connection guide

H1/1 ORANGE (-) ground-when-armed output
This wire supplies a (-) ground as long as the system is armed. It can supply up to 500 mA of current. This output
is used to control an optional starter kill relay (GM P/N 12463503).
H1/2 WHITE (+/-) selectable light flash output
As shipped, this wire should be connected to the (+) parking light wire. If the light flash polarity jumper under
the sliding door is moved to the opposite position (see Internal Programming Jumper section of this guide), this
wire supplies a (-) 200 mA output. This is suitable for driving (-) light control wires in Toyota, Lexus, BMW, some
Mitsubishi, some Mazda, and other model cars.
NOTE: For parking light circuits that draw 10 amps or more, the internal jumper must be switched
to a (-) light flash output. (See the Internal Programming Jumper section of this guide.) The
optional Relay Accessory Package (GM P/N 12495659) must be used on the H1/2 light flash
output harness wire.
NVSL4000
All manuals and user guides at all-guides.com
(+) Positive Light Flash Output
(-) Light Flash Output
11 - English

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour GM VSL 4000

Table des Matières