System Features Learn Routine - GM VSL 4000 Guide D'installation

system features learn routine

The System Features Learn Routine dictates how the unit operates. It is possible to access and change any of the
feature settings using the Valet/program switch. However, this process can be greatly simplified by using the
optional hand-held system programmer (GM P/N 9M904965). Any of the settings can be changed and then
assigned to one of up to four transmitters. This feature is called Owner Recognition. Each time that particular
transmitter is used to disarm the system, the assigned feature settings will be recalled. Owner Recognition is only
possible when programming the unit via the computer interface or hand-held programmer.
If programming with the hand-held programmer, the learn routine can be locked or unlocked. If the learn
routine has previously been locked, it must be unlocked before proceeding with reprogramming the learn
routine. This must be done by using an optional hand-held system programmer - this cannot be done manually
with the Valet switch. If the learn routine is locked, features cannot be changed.
To enter the System Features Learn Routine:
1. Open a door. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2. Key. Turn the ignition on, and then off. (The H1/9 YELLOW wire must be connected.)
3. Select a feature: Press and release the Valet/program switch the number of times corre-
sponding to the feature you wish to change. For example, to access the third feature, press
and release three times. Then press the switch once more and HOLD it. The siren will chirp
the number of times corresponding to the feature you have accessed.
FEATURE DEFAULT ONE-CHIRP SETTINGS
NUMBER (PRESS TRANSMITTER ARM BUTTON)
1 Active arming
2 Confirmation chirps ON
3 Ignition-controlled door locks ON
4 Active locking
5 0.8-second door lock pulse duration
6 Single unlock pulse
7 Door trigger error chirp ON
8 Valet switch input: 1 pulse
9 Channel 3: validity
NOTE: Factory defaults are indicated in bold type.
NVSL4000
All manuals and user guides at all-guides.com
29 - English
TWO-CHIRP SETTINGS
(PRESS TRANSMITTER DISARM BUTTON)
Passive arming
Confirmation chirps OFF
Ignition-controlled door locks OFF
Passive locking
3.5-second door lock pulse duration
Double unlock pulse
Door trigger error chirp OFF
Valet switch input: 2-5 pulses
Channel 3: latched/latched reset with ignition/
30-seconds timed/second unlock output