Hürner CNC ECO 1200 2.0 Manuel Utilisateur page 49

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
"Inventory Number – M – " means that by pressing the
MENU key, the user can access a sub-menu for entering
the number under which the unit is inventorized inter-
nally with the operating company.
"Number of Tags – M – " means that by pressing the MENU
key, the user can access a sub-menu for entering the
number of tags that are printed automatically after
welding with the optional label tag printer if such a
printer is connected.
"Standard – M – " means that by pressing the MENU key,
the user can access a sub-menu for selecting the stan-
dard (guideline, normative scheme) applicable to the
welding operation.
4.1.3 Selecting the Display Language
When the "Language" sub-menu was selected, the screen
changes and the display reproduced in Display 7 appears.
Use the arrow keys ñ and ò to select one of the options,
"Deutsch," "English," "Français," etc. and confirm by press-
ing the START/SET key.
4.1.4 Setting the Clock
When the "Date/Time" sub-menu was selected, the screen
changes and the display reproduced in Display 8 appears.
The time of day and the date can be set using the key-
pad. The portions "Hour," "Minute," "Day," "Month," and
"Year" are set separately. Press the START/SET key to con-
firm your settings.
4.1.5 Setting the Buzzer Volume
When the "Buzzer Volume" sub-menu was selected, the
screen moves on to what is reproduced in Display 9. The
buzzer can also be heard. Turn the buzzer up or down to the
desired value using the ï, ð cursor keys (from 0 to 100) and
confirm your setting by pressing the START/SET key.
4.1.6 Understanding the "Recording" Sub-menu
"Welder Code on" means that the welder identification
code has to be entered as set with "Welder Code Op-
tions," under "Settings," "off," that this is impossible.
"Commission Number on" means that the commission num-
ber (job number) will have to be entered or confirmed
before every new welding, "off" that the user is not
prompted to enter it.
"Joint Number on" means that the systems assigns an au-
tomatically incremented joint number to every welding
operation belonging to a commission already known,
and displays this number on the screen next to the re-
port number, "off" that no joint numbers will be as-
signed at all.
Version October 2021 HÜRNER CNC ECO 1200 2.0 User's Manual
***** LANGUAGE *****
>Deutsch
English
Francais
Display 7
Date/Time
21.06.13 14:28
Display 8
Buzzer Volume
< ------20-------- >
Display 9
CONFIGURATION **
**
>Welder Code On
Commission No. On
Joint No. Off
Display 10
EN
17