VFA0397
VFF0193
2
1
Using the Software with a Computer
An image stored on the DV Cassette can be transferred to your
Personal Computer.
ª Software Installation
1
Turn on Computer and start up Windows.
2
Insert supplied CD-ROM into the CD-ROM drive.
≥[Setup Menu]
1
3
Select the software to be installed from
[Setup Menu].
≥USB Driver (l 69):
Software for USB Driver allows you to transfer images directly
from the memory card into the computer. (Please refer to page
69 to install the driver of the USB Driver.)
≥DV STUDIO 3.1E-SE (l 73):
Using the DV STUDIO 3.1E-SE software allows you to capture
video recorded on a tape or still images viewed through the
lens of a camera.
≥G.726 Audio Decoder (l 74):
Software for G.726 Audio Decoder allows you to listen to
MPEG4 sound with Windows Media Player.
≥ArcSoft Software (l 75):
PhotoImpression 4.0, PhotoBase 4.0, Panorama Maker 3.0
and PhotoPrinter 4.0 are included.
4
Follow the instructions on the computer screen until
the installation is complete.
≥Setup window will disappear when the installation is complete.
Note:
If a window does not appear automatically, click the "Start" Button on
your desktop and then click "Run". When the "Run" Box is open, type
in "D:\InstMenu.exe" and click "OK". ("D" applies when the CD-ROM
drive is drive D.)
~~~~~~~~~~~~~~~~~~~~~~
Using USB Driver
ª Operating environment
≥Despite having the operating environment indicated, it may not be
possible to use the program with some types of personal
computers.
≥A CD-ROM drive is required to install this program.
OS:
IBM-PC/AT compatible personal computer with pre-installed;
Microsoft Windows XP Home Edition/Professional
Microsoft Windows 2000 Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium II/ Celeron 300MHz or higher (including compatible
CPU)
RAM:
32 MB or more (64 MB or more is recommended)
(128 MB or more are required for Windows XP.)
Free hard disk space:
At least 1 MB
Ports:
USB Terminal
68
(Windows)
appears.