2, 3, 4
W.B / SHUTTER / IRIS
PUSH
MF / VOL / JOG
AUTO
1
MANUAL
FOCUS
MNL
1
4
10 000K
9 000K
8 000K
7 000K
6 000K
5)
5 000K
6)
1)
4 000K
7)
3 000K
8)
9)
2 000K
10)
1 000K
K=Kelvin Color Temperature
Adjusting White Balance Manually
When the Auto White Balance Adjustment function does not operate
suitably under the existing light conditions, use the Manual White
Balance Adjustment mode.
1
Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication
2
Press the [PUSH] Dial.
≥The [AWB] Indication appears.
3
Rotate the [PUSH] Dial until the [
displayed.
4
Point the Palmcorder at a full-screen white subject,
and then keep the [PUSH] Dial pressed until
indication [
1
≥When the [1] Indication flashes after turning the Palmcorder
on, the previously adjusted white balance setting is still kept.
2
To Resume Automatic Adjustment
Rotate the [PUSH] Dial until the [AWB] Indication appears. Or, set
the Mode Selector Switch to [AUTO].
3
ª About White Balance Sensor
The White Balance Sensor
source during recording.
≥Do not cover the White Balance Sensor with your hand during
2)
recording. Otherwise, White Balance will not work normally.
≥The red light from the Recording Lamp
3)
hand or object, possibly causing the White Balance sensor to
operate incorrectly and changing the colouring.
4)
Use of Auto White Balance Adjustment in inappropriate lighting
conditions may result in reddish or bluish images. Where the subject
is surrounded by many light-sources, Auto White Balance
Adjustment may not operate properly. In such a case, we suggest
that you adjust the White Balance.
1) The range that is controlled by the Auto White Balance
Adjustment Mode of this Palmcorder
2) Blue sky
3) Cloudy sky (Rain)
4) TV screen
5) Sunlight
6) White fluorescent light
7) Halogen light bulb
8) Incandescent light bulb
9) Sunrise and sunset
10) Candlelight
≥For other notes, see page 87.
1
appears.
1
] stops flashing.
3
determines the nature of the light
38
1
] Indication
4
will be reflected off your
2
is