Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation page 54

2
1
STILL
1
%
T A P E
NOW WRITING
CARD CARD
1, 2 TAPE
MODE
3
R:0h20m
ª Automatically copying still pictures recorded on
a cassette
The Palmcorder copies images automatically, referring to Photo
W.B / SHUTTER / IRIS
Index signals.
PUSH
MF / VOL / JOG
After setting the Palmcorder to the VCR Mode (l 42).....
1
Set the Palmcorder to Still Playback Mode just before
the point where picture transfer is to commence.
2
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]
>> [RECORD TO CARD] >> [YES].
≥Search starts from the current Cassette position, and images
with Photo Index signals are recorded onto the Card
sequentially.
≥While copying, the Indication
To Stop the Transfer of Images
;
C A R D
Press the [∫] Button.
≥For other notes, see page 90.
ª Recording Voice (Voice Recording Function)
You can record voice data on a memory card.
1
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [VOICE] Indication appears.
3
Press the Recording Start/Stop Button.
≥Voice from built-in microphone is recorded.
≥It takes 2 to 3 seconds to start recording.
≥The recorded file is automatically locked (to prevent accidental
erasure).
≥Voice from external microphone connected to the microphone
jack can also be recorded.
≥During recording, the [
≥When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be
started.
Maximum recording time on the supplied Card (8 MB)
Approximately 25 minutes
VOICE
≥For other notes, see page 89.
] Indication is lit in red.
VOICE
54
1
appears.