Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation page 12

1
2
3
4
3
4
CAMERA
VCR
CARD
PB
5, 6
6
8
7
SEARCH
FADE
BACK
LIGHT
9
5
CAMERA
VCR
CARD
PB
Quick Guide
1
Charge the Battery.
≥Connect the AC Cable to the AC Adaptor and plug it into the
AC Wall Outlet.
≥Attach the Battery to the AC Adaptor. (This will start the
charging process.)
≥The [POWER] Lamp and [CHARGE] Lamp light up, and
charging starts. When the [CHARGE] Lamp goes off, charging
is completed.
≥Since the Battery will not be charged when the DC Cable is
connected to the AC Adaptor, disconnect it.
2
Attach the Charged Battery to the Palmcorder.
3
Insert the Cassette.
≥Slide the [OPEN/EJECT]
OPEN /
EJECT
down to open the Cassette Compartment.
1
≥Insert the Cassette.
≥Press [PUSH CLOSE]
≥Close the outside compartment Cover.
2
4
Start recording.
≥Turn the Palmcorder on. (l 20)
≥Rotate the Switch
≥Press the
≥Press the
To View the Playback Picture
5
Switch to the VCR Mode, rewind the tape, and play
the tape back.
≥Set the
≥Press the
≥Press the
≥Press the
6
Turn the Palmcorder off.
≥Set the
(l 18)
(l 20)
1
2
to load the Cassette.
(l 28)
3
to [ON]. (The [CAMERA] Lamp lights up.)
4
Button. (Recording starts.)
4
Button again to pause the recording.
(l 42)
5
Switch to VCR mode. (The [VCR] Lamp lights up.)
6
Button. (Rewind the tape.)
7
Button. (Playback starts.)
8
Button. (Playback stops.)
9
Switch to [OFF].
12
Lever toward the front and pull
)
(l 20
(l 18)