Magicpix Function; Wind Noise Reduction Function - Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation

1, 2
MAGIC
PIX
1
MAGICPIX
2
0LUX
MAGICPIX
3
W.B / SHUTTER / IRIS
PUSH
1
MF / VOL / JOG
1
WIND CUT

MagicPix Function

This function allows you to record color images brightly in a dark
place without using a light.
1
Press the [MAGICPIX] Button until the [MAGICPIX]
1
Indication appears.
0 Lux MagicPix Function
Using the LCD Monitor light, a dark scene of almost 0 lux can be
recorded.
2
Press the [MAGICPIX] Button until the
[0LUX MAGICPIX] Indication
≥The [REVERSE THE LCD MONITOR] Indication appears.
3
Rotate the LCD Monitor frontward (to the lens side).
≥The screen becomes white and the Viewfinder turns on.
≥The available range of the LCD Monitor light is within
approximately 3 feet (1 metre).
To Cancel the MagicPix Function
Press the [MAGICPIX] Button repeatedly until neither the
[MAGICPIX] Indication nor the [0LUX MAGICPIX] Indication
appears.
≥For other notes, see page 86.
~~~~~~~~~~~~~~~~~~~~~~

Wind Noise Reduction Function

This function reduces the noise that the wind makes as it hits the
microphone during recording.
1
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP]
>> [WIND CUT] >> [ON].
≥The [WIND CUT] Indication
To Cancel the Wind Noise Reduction Function
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>
[WIND CUT] >> [OFF].
≥It does not work with the microphone on the MagicWire Remote
Control with Narration Mic nor an external microphone.
≥When it is set to [ON], directivity of microphone is regulated
depending on the strength of wind to reduce wind noise.
34
2
appears.
1
appears.