Renkforce 1312695 Notice D'emploi page 89

j) Redial/Use Number Storage
The mobile unit must be in standby mode. It must not be switched off or in a menu, etc.
u Display and Dial Last Number Called
• Briefly push the button „
display.
Use the button „ " (10) or the right function button to cancel the redial function.
If there is no number (e.g. at initial commissioning), the corresponding message is displayed.
• Briefly push the button „
u Use Redial Number Storage
The mobile unit saves the 10 last numbers that you dialled. If there already are 10 numbers in the storage,
the respective „oldest" number is overwritten.
To display a number and dial it, proceed as follows:
• Briefly push the button „
display.
Use the button „ " (10) or the right function button to cancel the redial function.
If there is no number (e.g. at initial commissioning), the corresponding message is displayed.
• Use the buttons „ " (2) or „
the mobile unit emits a sound signal.
• Briefly push the button „
All manuals and user guides at all-guides.com
" (11) or the right function button (9). The last dialled number appears in the
" (3) to dial the displayed number.
" (11) or the right function button (9). The last dialled number appears in the
" (12) to display the present numbers. At the end of the displayed list,
" (3) to dial the currently displayed number.
89