Renkforce 1312695 Notice D'emploi page 103

u Reset Basis Station
This function resets the basis station to factory settings (flash time and dial method).
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
(„BS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „ " (2) or „
left function button (1) briefly for confirmation.
• Then enter the PIN with the numeric buttons (in the delivery condition „0000"). Push the left function
button (1) briefly for confirmation.
• If the PIN has been entered correctly, the basis station is reset.
All manuals and user guides at all-guides.com
" (2) or „ " (12) to select the submenu for the setting of the basis station
" (12) to select the submenu for resetting the basis station and push the
103