Renkforce 1312695 Notice D'emploi page 101

All manuals and user guides at all-guides.com
e) Settings of the Basis Station
In this submenu, a mobile unit can be logged off from the basis station, the dial procedure can be switched,
the flash time set, the PIN changed and the basis station reset.
u Log off the Mobile Unit from the Basis Station
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „ " (2) or „
(„BS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „ " (2) or „
function button (1) briefly for confirmation.
• Enter the PIN (in the delivery condition „0000") and confirm it with the left function button (1).
• Use the buttons „ " (2) or „
unit or a mobile unit not logged on is chosen (these cannot be deleted), you will hear a warning sound.
• Push the left function button (1) to delete the selected mobile unit.
u Switch Dial Method
In modern phone grids, the tone dial method is usually used. If your phone grid operator does not
support both dial methods, you cannot make a call when the wrong dial method is set.
The basis station has the tone dial method set by default ex works.
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „ " (2) or „
(„BS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „ " (2) or „
station and push the left function button (1) briefly for confirmation.
• Use the buttons „ " (2) or „
dial.
• Save the setting with the left function button (1); a brief confirmation sound is emitted.
In modern phone grids, the tone dial method is usually used. If your phone grid operator does not
support both dial methods, you cannot make a call when the wrong dial method is set.
" (12) to select the submenu for the setting of the basis station
" (12) to select the function for logging off a mobile unit and push the left
" (12) to select the mobile unit to be deleted. If the currently used mobile
" (12) to select the submenu for the setting of the basis station
" (12) to select the submenu for the setting of the dial method of the base
" (12) to select between the two dial methods tone dial and impulse
101