Renkforce 1312695 Notice D'emploi page 107

u Setting the Mobile Unit Name
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
(„HS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „ " (2) or „
the left function button (1) briefly for confirmation.
• Enter the desired name with the numeric keys (5).
For a table with all available characters, see chapter 12. d).
To select a specific character, push the same button briefly several times.
If you want to accept the displayed character, pause briefly. The flashing input cursor will now move to
the next digit.
The right function button (9) deletes the last character entered.
When all characters are deleted, the mobile unit will use the default setting as a name.
• Save the name with the left function button (1); a brief confirmation sound is emitted.
u Switching the Automatic Call Acceptance On/Off
• Starting in the standby mode, briefly push left function button (1).
• Use the buttons „
(„HS Settings") and push the left function button (1) briefly for confirmation.
• Use the buttons „ " (2) or „
push the left function button (1) briefly for confirmation.
• Use the buttons „ " (2) and „
• Save the setting with the left function button (1); a brief confirmation sound is emitted.
When automatic answering of calls is activated, you only need to take the mobile unit from the
basis station when a call is coming in. You no longer need to push „
then.
All manuals and user guides at all-guides.com
" (2) or „ " (12) to select the submenu for the setting of the mobile unit
" (12) to select the submenu for setting the mobile unit name and push
" (2) or „ " (12) to select the submenu for the setting of the mobile unit
" (12) to select the submenu for the automatic answering of a call and
" (12) to switch the automatic answering of a call on or off.
" (3) to answer the call
107