Fastening The Buckle; Releasing The Buckle; Using The Chest Clip; Using The Recline - Britax FRONTIER CT Guide D'utilisation

Child Seat Functions

Fastening the Buckle

Insert one tongue at a time into
the buckle.
NOTE: Proper connection is
confirmed with an audible click
after inserting each buckle
tongue.

Using the Chest Clip

Squeeze to Push together to fasten
1 1
open
NOTE: Always position the chest clip at
armpit level.

Using the Recline

IMPORTANT: This child seat cannot be in the recline position when
used in booster mode.
Pull the recline adjustment
1
handle and adjust the seat to
the desired position.
* Adjust the seat and ensure that
it is locked into the desired
position before installing in the
vehicle.
* Ensure the top of the child seat
does not rest against the
top of the vehicle seat back
while reclining.
* Pay attention while adjusting
the recline to keep hands clear
of any pinch point.
24
All manuals and user guides at all-guides.com

Releasing the Buckle

Press the release button and
pull the tongues from the
buckle.
NOTE: Periodically clean
the buckle to ensure proper
operation. See Page 44.
Upright Position
2
Recline Position
3
Using the Lower Universal Anchorage System (LUAS)
and Tether
The figure above shows typical locations for lower anchors and
tether anchors in a vehicle. Check your vehicle owner's manual for
the exact lower anchor locations and seating positions (if equipped),
information on use with a child seat, and for the maximum weight
rating for the lower anchors.
Standard vehicle seat spacing between lower anchors is 27.9 cm
(11 inches). This child seat can be used in a seating position with
up to 50.8 cm (20 inches) of space between the lower anchors if the
vehicle manufacturer allows.
Child Seat Functions
25