Harness To Booster Mode: Removing The Harness And Buckle - Britax FRONTIER CT Guide D'utilisation

Switching Between Modes
Fasten the chest clip.
7
* Push together until a click is
heard.
Fasten the harness buckle.
8
Pull the adjuster strap to
9
tighten the harness.
* Pull the harness adjuster away
from the child seat (parallel to
the ground) to tighten.

Harness to Booster Mode: Removing the Harness and Buckle

Loosen the harness
1
completely.
a Press release lever
b Pull both harness straps forward
Unhook the harness straps from
2
the yoke.
* Store the yoke in a secure
place in the base.
Pull the harness straps out of
3
the slots.
32
All manuals and user guides at all-guides.com
Open the CLICKTIGHT.
4
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
Unhook the harness straps
5
from the CLICKTIGHT hip
anchors.
Unhook the retaining clips at
6
the back of the seat cover. Pull
the seat cover forward and
over the EZ-Buckle belly pad.
Turn and pull the buckle
7
retainer through the slot in the
child seat shell.
Switching Between Modes
33