Britax FRONTIER CT Guide D'utilisation page 23

Care and Maintenance
Cleaning the Cover
• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.
• DO NOT:
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Harness
• SPONGE CLEAN the harness using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Disassemble the harness
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Shell
• SPONGE CLEAN the shell using warm water and mild soap.
• TOWEL DRY
• DO NOT use abrasive cleaners.
Replacing the Cover
Pull the elastic bands over the
1
hooks on the bottom of the
child seat shell.
Hook the clips at the front of
2
the seat cover to the bottom of
the child seat shell.
Pull the EZ-Buckle belly pad
3
through the appropriate slot in
the seat cover. Hook the clips
at the back of the seat cover to
the child seat shell.
42
All manuals and user guides at all-guides.com
Fit the cover over the
4
CLICKTIGHT and pull the
elastic band over the hook on
the bottom of the CLICKTIGHT.
Close the CLICKTIGHT.
5
* A click confirms the
CLICKTIGHT is secure.
Fit the side wing cover to the
6
child seat shell and pull the
elastic band over the hook at
the top of the child seat shell.
Repeat for the other side.
Pull the bottom elastic bands
7
over the hooks at the bottom
of each side of the head
restraint.
Fit the head restraint cover
8
over the head restraint and
pull the top elastic bands
over the hooks at the top
of each side of the head
restraint.
Attach the hook and loop
9
fasteners on the head restraint
cover around the harness.
Care and Maintenance
43