Protection Functions - Würth 0510 955 710 Traduction Des Instructions De Service D'origine

Charging curve (IU I U) Starter batteries
0 0
U
I
1
Test
0%
1
Analysis of the battery
2
Recovery of damaged cells caused by long-term deep discharge
3
Sulphation test
4 Desulphation/battery recovery
5
Battery Recovery Test
6
Charging up to 80 %
7
Charging up to 95 %
8
Refreshing of the battery cells
9 Float charge
10
Repeats a charging cycle to maintain the power = oating
All manuals and user guides at all-guides.com
U=U
recovery
Recovery
max.
T
recovery
2 3 4
Shorted cell Sulphation
Desulphation
Recovery Test
10%
U=U
charge
Phase I Phase U
I=I
charge
Tch
5 6 7
Test Charge Absorption
20% 80%
The device is protected against short-circuits and reverse connection.
It has a spark-protection system, which prevents spark formation
when connecting the clamps to the battery. For safety reasons, the
clamps are voltage-free when the device is connected to a battery.
The device is equipped with an internal 125 A fuse, which protects it
against incorrect handling.
U=U
refresh
U=U
Phase I Phase U
0 0
T
refresh
I=I
refresh
8 9
New charge
Refresh Floating
cycle
95% 100%

Protection functions

10
25