Operation; Adjusting The Cut Height; Switching On And Off; Working With The Lawnmower - Grizzly Tools ERM 1600-34 L Traduction De La Notice D'utilisation Originale

5. Clip the cable holder (11) into
the bar (4) and thus fix the ca-
ble. (10).

Operation

Adjusting the Cut Height

Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
The mower can be adjusted by the inser-
tion of spacers (
cutting heights:
12 mm - Short cutting height
18 mm - Medium cutting height
25 mm - Medium cutting height
33 mm - Tall cutting height
1. Tilt the machine over
2. Using non-slip gloves, hold the
blade (17) firmly. Loosen the
blade bolt (16) with the supplied
spanner (5).
3. Depending on the desired cut-
ting height, click the spacers
(18) together. The more spacers
you use, the lower the cutting
height.
4. Removing the blade (17). Press
the required spacers into the
recesses provided on the blade.
5. Position the blade (17) on the
fan (19) with the inserted spac-
ers (18) upwards and connect
everything with the blade bolt
(16). Tighten with the spanner
( 5).
A higher cut height should be se-
lected for the first cut of the season.
18) to the following

Switching On and Off

1. Plug the mains lead into the ex-
tension cable outlet (12) at the
curved handle (1).
2. Turn the end of the mains lead
into a loop and hook it into the
cable strain relief (14).
3. Connect the equipment to the
power supply.
4. Before switching on, ensure that
the equipment is not in contact
with any objects.
5. Before switching on, tilt the
lawnmower SLIGHTLY to one
side. This facilitates the start-up
and prevents an unintentionally
deep cutting circle at the point of
contact, as the air cushion only
builds up after start-up.
6 To switch on, press the .
release button (13)
while holding down the
start lever (15).
Release the release button (13).
7. To switch off, release the start
lever (15).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do not
touch the moving blade. There
is a risk of injury.

Working with the Lawnmower

Observe noise control and local
regulations.
Regular mowing encourages increased fo-
liation of the grass and kills off weeds at the
same time. Therefore, not only does each
mowing increase the density of the lawn, it
also produces an evenly resilient lawn.
GB
65