Connecting The Cables - Roland Advanced Jet AJ-1000 Mode D'emploi

4. Connecting the Cables

Connecting the Cables
WARNING
WARNING
CAUTION
Ethernet (100BASE-TX recommended)
Dryer power-cord
connector
Ethernet cable
(Category 5 or
higher)
Never insert a
telephone cable.
26
Connect to an electrical outlet that complies with this machine's ratings (for volt-
age, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of malfunc-
tion.
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Power cords
Ratings
Electrical outlets:
200V to 240V, 10A or more
The printer and the dryer require separate high-
amperage electrical outlets. Connect the two power
cords to outlets on separate systems. Also, make
sure that the electrical outlets meet the machine's
ratings.
Printer power-cord
connector
Take care to ensure no contact
with the media or rollers.