Roland Advanced Jet AJ-1000 Mode D'emploi page 30

5. Installing the Ink Cartridges
2.
Remove the covers, then remove the film that protects the heads from drying out.
SELECT INK TYPE
EXt Ink LcLm
INSTALL
DRAIN BOTTLE
FILLING INK...
>>
REMOVE FILM
Right side cover
Film
SET MAINTENANCE
28
Tube
Drain bottle
FROM CAP
Screws
Maintenance
cover
Screws
LIQUID
Use to select the ink type.
Press .
The screen shown in the figure appears.
Make sure the drain bottle is installed.
Make sure the tube is inserted into the drain bottle.
Press .
The screen shown in the figure appears.
Preparations are complete when this screen appears.
Remove the right side cover.
Remove the maintenance cover.
Remove the film.
Press .
Preparations are complete when this screen appears.