Spark Plug; Lubrication - Mountfield 2135H Mode D'emploi

7.10 SPARK PLUG

The spark plug(s) must be replaced every 200
hours of operation (=at every other basic service).
Before disconnecting the spark plug, clean around
its mounting.
Spark plug: Champion RC12YC or equivalent..
Electrode distance: 0.75 mm.
7.11 AIR INTAKE (10:P)
The engine is air-cooled. A blocked cooling sys-
tem can damage the engine. Clean the engine's air
intake after 50 hours of operation. More meticu-
lous cleaning of the cooling system is carried out
during each basic service.

7.12 LUBRICATION

All lubrication points in accordance with the table
below must be lubricated every 25 hours of
operation as well as after every wash.
Object Action
Rear 3 grease nipples.
shaft Use a grease gun filled with uni-
versal grease. Pump until the
grease emerges.
Steering Brush the cables clean with a wire
cables brush.
Lubricate with universal chain
spray.
Tension- Lubricate the bearing points with
ing arms an oil can when each control is
activated.
Ideally carried out by two people.
Control Lubricate the cable ends with an
cables oil can when each control is acti-
vated.
Must be carried out by two peo-
ple.
Lubricate the deck mount's lubri-
cating cup using a grease gun until
grease penetrates along side the
axle.
7.13 FUSES
If any electrical fault occurs, replace the relevant
fuse. The fuse(s) is located together with the
battery under the engine casing.
All manuals and user guides at all-guides.com
ENGLISH
This machine or parts thereof is covered by the
following patent and design registration:
9900627-2 (SE), SE00/00250 (PCT), 9901091-0
(SE), SE00/00577 (PCT), 9901730-3 (SE), SE00/
00895 (PCT), 9401745-6 (SE), SE95/00525
(PCT), 595 7497 (US), 95920332.4 (EPC).
99 1095 (SE), 499 11 740.9 (DE), M1990 000734
(IT), 577 251-253 (FR), 115325 (US).
Authorised service workshops carry out repairs
and guarantee service. They use original spare
parts.
GGP original spare parts and accessories are
Fig.
designed specifically for GGP machines. Please
13
note that 'non-original' spare parts and
accessories have not been checked or approved
by GGP.
-
16
Original spare parts are supplied by service
workshops and by many dealers.
We recommend that the machine be handed in to
an authorised service workshop for service,
16
maintenance and checking of the safety devices
once a year.
15
Original instructions for use
8 PATENT - DESIGN
REGISTRATION
9 SERVICE
The use of such parts and accessories
can affect the function and safety of the
machine. GGP accepts no responsibility
for damage or injuries caused by such
products.
EN
15