Scope Of Delivery; The Operating Elements - Vermeiren Eclips+ Mode D'emploi

E
When providing for individual requirements
• body size and weight (max. load 286.60 lb.)
• physical and psychological condition
• residential circumstances and
• the environment
should also be taken into consideration.
Your wheelchair should only be used on surfaces where all four wheels are touching the ground and
there is enough contact to propel all the wheels equally. You should practise specially to cope with
uneven surfaces (cobblestones, etc.), slopes and curves (swerving to the side, etc.) and to get past
obstacles (e.g. kerbs). Moving on surfaces such as ice, grass, gravel, foliage and other firm or loose
surfaces that impede movement can be particularly hazardous.
It should not be used as a seat in a vehicle. The nominal load of 286.60 lb. should not be exceeded,
and no more than one person should be propelled. The wheelchair is not to be used as a ladder, a
resting place for heavy or hot objects, or for other purposes that are not the active or passive
propelling of a person. With mats, carpeted floors and loose floor coverings, the floor coverings
themselves may be damaged and the wheelchair may tip over. The manufacturer can assume no
liability if the wheelchair is used in combination with products or fittings made by other manufacturers
or components that change the purpose for which it is intended.
Guarantees can only be met when the product is used under the prescribed conditions and for

SCOPE OF DELIVERY

Wheelchair including flexible back and seat covers, driving and steering wheels, tipping lever (for
•
Eclips+30° additionally: adjusting system 30° back angle)
• Foot supports
• Armrests
• Instruction manual
Tools (Allen keys)
•
NOTE TO DEALER:
When you receive the goods, please check that the product supplied is complete and fully functional.
Warranty claims are only valid if the manufacturer (supplier) is notified in writing within a period of two
weeks. In the case of any defect that is not immediately evident, warranty claims are only valid if the
manufacturer (supplier) is notified in writing within two weeks after it is detected. We shall remedy
defects in the manner of our choosing - either by carrying out a repair or by providing a replacement.
TOOLS
The following tools are required for assembling and adjusting your wheelchair:
• Phillips screwdriver
• Allen keys (sizes 4 and 5)
• Ring and open-ended spanners (sizes 10/13)
• Ring spanner (size 19)
• Open-ended spanner (size 11)
L
Assembly and adjustments may only be undertaken by your specialist dealer.

THE OPERATING ELEMENTS

The wheelchair should be delivered, already fully assembled, by authorised persons who will also
explain the various operating elements and how to use them. However, for your own safety, we
provide another detailed explanation of the various parts here.
All manuals and user guides at all-guides.com
the intended purposes.
5
Eclips+/Eclips+30°
11/2008