MINN KOTA TERROVA Instructions D'installation page 13

Connecting a Universal Sonar Extension Cable
The Universal Sonar Cable may not be long enough to reach the fish finder. If the cable length does not reach the desired fish
finder installation location, a 14.5' extension cable is available. Minn Kota recommends using the MKR-US2-11.
1
a. Place the motor in the deployed position.
b. Locate the Universal Sonar, if equipped, at the
base of the Mount.
c. Locate the Universal Sonar four pin connector at
the end of Universal Sonar Extension Cable. The
connector is black with a stainless steel threaded
locking collar.
NOTE:
off until this procedure is complete.
Four Pin Connector
2
d. Align the pins of the Universal Sonar connector
plug from the Control Head with the matching
socket end of the appropriate Universal Sonar
Extension Cable for your fish finder. Firmly
push the connector plug into the socket of the
Universal Sonar connection. Twist the locking
collar until it is snug.
e. Connect the other end of your adapter plug to
your fish finder following the manufacturer's
instructions.
©2016 Johnson Outdoors Marine Electronics, Inc.
Your fish finder should be turned
Universal Sonar
Cable from
Control Head
CONNECTING A UNIVERSAL SONAR ExTENSION CABLE
Mount
NOTE:
If the cable length does not reach the desired
fish finder installation location, a 14.5' extension cable
is available (MKR-US2-11) (sold separately).
Universal Sonar
Extension Cable
Locking Collar
NOTE:
installation.
Control Head
Universal
Sonar
Coil Cord
Universal Sonar Cable
from Control Head
The connectors are keyed to prevent reversed
Four Pin Connector
minnkotamotors.com | 13