Safety Advices - Aqua Medic Magnifica LED Mode D'emploi

Depending on the water quality, the pump has to be cleaned from time to time. Pull out the power
plug before you start any work at the pump. Remove the pump housing. Now, the complete rotor
(9 - 11) can be removed, cleaned under running water and reassembled in the opposite order.
6. Lighting system 2 x Ocean Light 54 watts
6.1. Technical Data
Power requirements: 100 - 240 V AC, 50 - 60 Hz.
- 3 watts high-performance LEDs
- total lumen 7,416
- colour temperature 14,000 K
- durability of the LEDs – according to manufacturer's data – 50,000 hours
- safety voltage 24 V with external power pack
Version:
- Ocean Light LED 54 watts (6 x 3 watts blue and 12 x 3 watts 12,000 K)
Dimensions (l x w x h): approx. 90 x 12 x 25 cm
The body is made of anodized aluminium. The cooling is done passively.
6.2. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of
complaints, please contact your dealer directly.
Included in shipment:
Ocean Light LED incl. power pack 24 V DC output
•
Aquaria fixing
•

6.3. Safety advices

The housing may become hot during operation. Be cautious when touching it! For cleaning,
•
disconnect the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning, take care that no humidity and no salt passes the ventilation slits and enters the
•
interior of the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
6.4. Assembling/changing the lamp
Broken LEDs can be exchanged only by the manufacturer.
Electric connection:
The Ocean Light LED can be connected to any safety socket or a timer, if automatic operation is
required. In case of using a timer, all LEDs will be switched on and off at the same time.
A separate control of white and blue LEDs is possible by using the controller sunrise Control. It
can be connected to the connection socket of the Ocean Light LED by a control cable that
is available as an accessory (Art.-No. 86604).
When working on the light, always pull all power plugs!
29