Safety Instructions - Aqua Medic Angel LED 200 Mode D'emploi

In purchasing this unit, you have selected a top quality product. It has been specifically designed for aquarium
use and has been tested by experts. High quality components and latest technology as well as modern design
guarantee that you will enjoy your aquarium lighting for many years.
Get Started
Thank you for choosing the Aqua Medic angel LED 200 series as your LED lighting system.

SAFETY INSTRUCTIONS

• Never look directly at the LEDs, as the light emitted from LEDs can cause eye or skin damage. UV and IR
emitted from this product can cause permanent damage to eyes or skin. Always minimize exposure to eyes
and skin directly from the LEDs.
• A drip loop must be used with all electrical aquarium devices. A drip loop is self-made by installing part of
the power cord looping down below the power socket.
• Aqua Medic is not responsible for problems, your personal safety or equipment damage caused by your
mishandling of the product.
• Check the power cord, plug and socket are intact.
• Before installing, please read all state and local laws, make sure you use a compliant power adapter.
• Ask a qualified person for the wiring installation.
• Install the light fixture securely so no risk of contact with water.
• Do not put anything on the product.
• Avoid objects from entering the unit. Keep the slot, ventilation's openings clean, they should not be blocked
or covered.
• Do not allow water to splash, or place unit in the water.
• If the light fixture or power supply becomes damaged, please have it repaired or replaced by a professional
person.
Operating Manual ENG
Included in shipment
1. angel LED 200
2. Power Supply
3. Power Cord
4. Suspension
5. Instructions
Description
17