Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.3. Safety advices
The housing may become hot during operation. Be cautious when touching it! For cleaning,
•
disconnect the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning, take care that no humidity passes the ventilation slits and enters the interior of
•
the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
4.4. Assembling/changing the lamp
Broken LEDs can be exchanged only by the manufacturer.
Electric connection:
The Ocean Light LED can be connected to any safety socket or a timer, if automatic operation is
required. In case of using a timer, all LEDs will be switched on and off at the same time.
A separate control of white and blue LEDs is possible by using the controller sunrise Control. It
can be connected to the connection socket of the Ocean Light LED by a control cable that
is available as an accessory (Art.-No. 86604). Furthermore, there is the control unit Ocean
Light LED Control available as accessory. A Y-cable (Art.-No. 86608) for connecting both Ocean
Light LED's is available as accessory.
When working on the light, always pull all power plugs!
4.5. Maintenance and Care
Clean the glass regularly (caution: let it cool down) from residues of water splashes and
evaporation with a moistened cloth. Never use any additional cleaning agents!
5.
Cover with fan
The fans (12 V/ 2 watts) are connected to the supplied transformer (90 – 240 V / 50/60 Hz). The
fans are adjustable and should remain constantly in operation at low power. Otherwise,
water will condense in the LED lights during the dark phase. If the outside temperatures are high,
the fans can be operated with higher speed.
5.1. Maintenance
The fans should be cleaned regularly, in particular the salt residues have to be removed. The fans
can be exchanged separately. Only exchange the faulty fan for an original Aqua Medic fan. Only
these are suitable for the installation to aquaria.
6.
Warranty
Should any defect in materials or workmanship be found within twelve months of the date of
purchase AB Aqua Medic undertakes to repair, or at our option replace, the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. Proof of Purchase is required by presentation of the original invoice or receipt indicating the
dealer's name, the model number and date of purchase. This warranty may not apply if any model
or production number has been altered, deleted or removed, unauthorised persons or organisations
have executed repairs, modifications or alterations, or damage is caused by accident, misuse or
neglect. Please note that the product is not defective under the terms of this Warranty where the
product, or any of its component parts, was not originally designed and / or manufactured for the
market in which it is used. These statements do not affect your statutory rights as a customer.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
17
- Technical changes reserved – 09/2014
Publicité
Table des Matières
