Sensitivity; Feeding Timer; Motion; Audio Sound - Alecto DVM-260+ Mode D'emploi

Sensitivity:

• This option allows you to select the level of sound sensitivity to either:
– Low: The baby monitor will turn on when the baby cries loudly.
– Average: The baby monitor will turn on when the baby cries normally.
– High: The baby monitor will turn on when even a small sound is made.

Feeding timer:

• With the feeding timer you can select an alarm tone every 2, 3, 4, 5 or 6 hours which will remind
you that you need to, for example, feed the baby. The timer-time will show on the bottom right of
the display screen.
The parent unit must remain on if the timer is set. If the parent unit is switched off, the timer
will also switch off.
The alarm sounds every 30 seconds. You can disable the alarm by switching off the feeding
timer.

Motion:

• In addition to sound, you can enable the baby monitor to give an alarm for detected movement.
You can select this feature in the menu and also set the level of sensitivity.
If movement is detected, an alarm will sound and the icon
shing red for around 15 to 20 seconds; new movements during the alarm will not be detected.
Once the alarm has stopped a new movement can be detected again.
Note that the movement mode will also respond to light changes in the image, for example if a
lamp is put on or as shadow is cast in the room.
The movement mode can be switched on when the VOX function is activated. When there is
movement, the image and the sound will be turned on.
The movement detection is activated with the multi-camera function, however, only the camera
you select (a red frame around the picture of this camera) using the keys
the movement detection mode on.

Audio Sound:

• This function switches off the sound when the baby sleeps and switches on the sound when the
baby cries. The image will remain on.
• Once you select the mute sound, the "
can be seen on the bottom right light.
• The 'sound sensitivity' (see previous page) is adjustable and can be changed
68
(Auto)" light will show above the display and the icon
-
/ / / will have