Delay In Picture And Sound; Power; Interference Free - Alecto DVM-260+ Mode D'emploi

6.4

DELAY IN PICTURE AND SOUND:

• The baby unit sends the image and sound in digital blocks to the parent unit. The parent unit
makes these digital blocks into a recognisable image and an audible sound again. There will
therefore be a slight delay between the time of actual movement and sounds, and the playing
back /hear back on the parent unit.
• Also the sound and the image on the parent unit will not be exactly in sync with the baby unit.
6.5

POWER:

• Baby unit:
The baby unit is powered from the supplied 6V power adapter. The baby unit has no built-in bat-
tery for cordless use.
• Parent Unit:
The parent unit is powered by a rechargeable 3.7V Lithium-Ion battery; this enables the parent
unit to work for up to 4 to 5 hours.
The battery level is displayed on the right side of the camera as follows:
: Battery is fully charged
: Battery is still 2/3 fully charged
:
: Battery is empty the parent unit will switch off
About 20 to 30 minutes before the battery is empty the
icon
conds. You will need to connect the adapter immediately.
The battery can be recharged within three hours; during charging the battery icon will show that
the battery is charging when parent unit is switched on, or the
parent unit is switched off. When the battery has been fully charged, the full battery icon
be displayed, or the
6.6

INTERFERENCE FREE:

• This video baby monitor is digitally encoded. You will never receive the signal from other
equipment, nor will the signal of your baby unit(s) be displayed on the parent unit of others, for
example your neighbours baby monitor.
•
signal (video or audio) could possibly be hampered. If this is the case, try a different location for
the baby unit (s) or move the parent unit, if possible away from the source of the interference.
72
light will be green.
light will show orange and the battery
light will show orange if the
-
will