Multiple Cameras; Automatic Night Vision - Alecto DVM-260+ Mode D'emploi

4.3

MULTIPLE CAMERAS:

• By default, the image of camera -1 will be shown on the display screen. Press the button
show the images of all registered cameras.
The images on the camera will reload one after another, and the movement in multi-mode will
be more slowed down compared to a full screen image.
• The image with a red border indicates what camera you are currently listening to. Use the
/ buttons to hear sound from another camera.
The button functions
the multi-mode. The VOX function will be active when switched on, however the sound and
image will only switch on when it detects sound from the selected camera with a red frame.
Sound from the other cameras will not be detected. When the Multi-mode is on, you cannot
switch the VOX function on or off.
Talk back is not possible.
•
of choice then press on the button
should now be full screen with the number of the camera showing on the left top corner of the
screen.
• Cameras that are not registered, or if the contact cannot be established will show this icon
4.4

AUTOMATIC NIGHT VISION:

The baby unit has 8 built in infrared LEDs, these LEDs will automatically activate when the built in
photo sensor of the baby unit detects a low level of ambient light, they will go off when light is detec-
ted again. These LEDs can illuminate objects up to a distance of approximately 2 meters.
Note that when the night vision LEDs are turned on, the image on the parent unit will be displayed in
black /white.
Attention: infrared beams cannot be perceived by the human eye; it is not possible to
detect that the LEDs have been switched on with the naked eye. However, depending on
the type infrared LED there may be a red glow which is visible.
66
, , and VOX are disabled during the multi-camera mode. To chan-
to exit the multi-mode; the image of the selected camera
/ / / keys to select the camera
to
/ /
.