Selecting The Mode; Workouts - Crivit 292988 Notice D'utilisation

• Distance covered at the current speed within 5
minutes from 0 to 1999 TIMES/m (10i)
• Predicted distance covered in 30 minutes from
0 to 9999m/30:00 (10j)
• Strokes per minute from 0 to 99 spm (10k)
• Calorie consumption* from 0 to 999 cal (10l)
* The calculation is based on pre-programmed
standard values, that serve as a guideline only.

Selecting the mode

You can either complete a standard training
session or choose from 10 pre-programmed

workouts.

1. Press the MODE button (10m) to switch from
the standard training display into the workout
mode.
2. Press the SET button (10n) to select one of the
10 pre-programmed workouts (P01–P10).
3. Press the OK button (10o) to confirm your
selection.
Workouts
P01
1. Choose the workout P01, as described in the
section "Selecting the mode" and start the
training session.
2. The total distance is 2,000m.
3. You may now start your training. The computer
counts down the pre-programmed values to
"0m".
4. As soon as the pre-programmed target is
reached, the computer stops counting.
P02
1. Choose the workout P02, as described in the
section "Selecting the mode" and start the
training session.
2. The total distance is 5,000m.
3. You may now start your training. The computer
counts down the pre-programmed values to
"0m".
4. As soon as the pre-programmed target is
reached, the computer stops counting.
P03
1. Choose the workout P03, as described in the
section "Selecting the mode" and start the
training session.
2. The total distance is 10,000m.
50 GB
All manuals and user guides at all-guides.com
3. You may now start your training. The computer
counts down the pre-programmed values to
"0m".
4. As soon as the pre-programmed target is
reached, the computer stops counting.
P04
1. Choose the workout P04, as described in the
section "Selecting the mode" and start the
training session.
2. The training session lasts for 30 minutes.
3. You may now start your training. The computer
counts down the pre-programmed values to
"0:00".
4. As soon as the pre-programmed target is
reached, the computer stops counting.
P05
1. Choose the workout P05, as described in the
section "Selecting the mode" and start the
training session.
2. Row 500m.
3. Take a 1 minute break.
4. Repeat 5 times.
5. The computer stops counting as soon as you
have completed all of the rounds.
P06
1. Choose the workout P06, as described in the
section "Selecting the mode" and start the
training session.
2. Row for 30 seconds.
3. Take a 30 second break.
4. Repeat 10 times.
5. The computer stops counting as soon as you
have completed all of the rounds.
P07
1. Choose the workout P07, as described in the
section "Selecting the mode" and start the
training session.
2. Row for 1 minute and then take a 1 minute
break.
3. Row for 2 minutes and then take a 2 minute
break.
4. Row for 3 minutes and then take a 3 minute
break.
5. Row for 4 minutes and then take a 4 minute
break.