FC1 Ex – Explosion-Proof Units
Overview of changes and supplements for the explosion-proof
version FC1 Ex in comparison with the non explosion-proof handsets
Safety instructions
To ensure safe handling of explosion-proof units in hazardous areas, we
have compiled important safety instructions for you. Read and follow these
instructions in any case before entering a hazardous area with an
GB
explosion-protected FC1 Ex.
Commissioning
The battery is attached to the housing with a securing screw. The
FC1 Ex has its own, specially equipped charger with its own dedicated
plug-in power supply unit. Other chargers and plug-in power supply units
must not be used for charging the FC1 Ex.
Technical data
The explosion-proof version FC1 Ex has a bigger housing, a slightly higher
weight and slightly shorter airtimes and stand-by times than other
comparable handsets.
Accessories
As compared with the non explosion-proof handsets, the explosion-proof
version FC1 Ex is equipped with ...
• a special charger with the designation Tischladegerät FC1 Ex
corresponding special plug-in power supply unit
supply unit is available for use in Great Britain. Please contact your sales
outlet.
• an explosion-proof battery bearing its part number and the
on the housing.
• The FC1 Ex must not be operated using a headset. The connection
socket for the headset is sealed by a plastic plug. This plug must not be
removed!
Manufacturer's order number: 50 1018 1001.
1
Manufacturer's order number: 4 999 070 859
2
V 1.1a • 10/2004
78
All manuals and user guides at all-guides.com
Integral Enterprise • Integral 33/55 • Integral 3/5
and a
1
. A UK plug-in power
2
marking
V 2.1a • 08/2008