Authorized Use - probst EXG-MAXI Instructions D'emploi

Pince de manutention pour plaques
Masquer les pouces Voir aussi pour EXG-MAXI:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

General
3 General
3.1

Authorized use

The device (EASYGRIP EXG-MAXI) is specially suitable for handling of parallel, plane and non-conical concrete
elements, such as border stones, slabs, block steps and kerb stones in conjunction with a chain or a rope at a
corresponding support frame (e.g. loading crane mini-excavator) and can the operated mechanically by one
person.
The device (EASYGRIP EXG-MAXI) is equipped with two handles and thus is also suitable for a two-man manual
operation.
This device is series-produced equipped with the following elements:
suspension lug for support frame.
handles for the guidance of the device
exchangeable rubber bars (as gripping elements)
adjustable gripping range
The device is only designed for the use specified in this documentation.
Every other use is not authorized and is forbidden!
All relevant safety regulations, corresponding legal regulations, especially regulations of the declaration of
conformity, and additional local health and safety regulations have to be observed.
Prior to every operation the user must ensure that:
the equipment is suited to the intended operation, the functioning and the working condition of the
equipment is examined, and the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
ATTENTION: The use of this device is only permitted in proximity to the ground.
Only stone elements with parallel and plane surface are allowed to be picked-up and handled.
Because the gripping good could fall down.
8 / 18

Publicité

Table des Matières
loading

Table des Matières