Installation; Mechanical Connection; Suspension Lug; Load Hook And Chains - probst EXG-MAXI Instructions D'emploi

Installation

4 Installation
4.1

Mechanical connection

4.1.1

Suspension lug

●
The device is equipped with a suspension lug and can be mounted on various carrier/lifting equipment.
●
Take careful that the suspension lug is safety joined with the crane hook and cannot slide down.
●
The maximum carrying capacity/working load limit (WLL) of the carrier/lifting equipment is not allowed to
exceed by the dead weight of the device and the maximum load.
4.1.2

Load hook and chains

●
Fit suspension ring in the load hook of the lifting equipment/carrier.
●
Ensure that the single chains are not twisted and may be easily pulled through the jaws
●
Attaching the device to the lifting equipment take care that all local safety regulation is observed.
●
It is not allowed to exceed the carrying capacity of the lifting equipment with the device and the maximum
load.
11 / 18