Declarations Of Conformity - KERN AGB Série Mode D'emploi

Declarations of Conformity

The CE marking affixed to the equipment
indicates that the equipment meets the
requirements of the following Directive(s)
issued by the Council of the European
Union:
Council Directive 89/336/EU
"Electromagnetic compatibility (EMC)"
Important Note:
The operator shall be responsible for any
modifications to KERN equipment and for
any connections of cables or equipment
not supplied by KERN and must check and,
if necessary, correct these modifications
and connections. On request, KERN
will provide information on the minimum
operating specifications (in accordance
with the Standards listed above for
defined immunity to interference).
73/23/EU "Electrical equipment designed
for use within certain voltage limits"
If you use electrical equipment in installations
and under ambient conditions requiring
higher safety standards, you must comply
with the provisions as specified in the
applicable regulations for installations in
your country. For information on the current
legal requirements of your country, please
contact your local KERN customer service
office.
Additional Directive for Weighing
Instruments Used in Legal Metrology:
Directive 90/384/EU "Non-automatic
weighing instruments"
This Directive also regulates the performance
of the EC verification by the manufacturer,
provided that an EC Type-Approval Certifi-
cate has been issued and the manufacturer
has been accredited by an officer of a
Notified Body registered at the Commission
of the European Community for performing
such verification. On February 15, 1993,
the manufacturers received accreditation
for performing verification.
Subsequent Verifications within the
European Countries
The validity of the verification will become
void in accordance with the national regula-
tions of the country in which the balance is
used. For information on verification and
legal regulations currently applicable in
your country, and to obtain the names of
the persons to contact, please contact your
local KERN office, dealer or service center.
59