KERN AGB Série Mode D'emploi page 35

Setting up the Balance
Balances with an Analytical Draft Shield
Place the components listed below inside
the chamber in the order given:
– Shield plate
– Shield ring
– Pan support
– Weighing pan
Balances with a Glass Draft Shield
Place the components listed below inside the
chamber in the order given:
– Draft shield base – place it on the balance so that
the edge for fitting the glass draft shield faces
upwards and turn it until it is firmly in place
– Pan support
– Weighing pan
– Glass draft shield
– Draft shield cover – place it on the balance so that
the edge faces downwards
Balances with a Round Weighing Pan
Place the components listed below inside
the chamber in the order given:
– Pan support
– Weighing pan
Balances with a Rectangular Weighing Pan
Place the weighing pan on the balance
35